Transparent: The alarm is active only while receiving alarm input. The alarm condition is canceled when the alarm input ceases. Interleaved Exclusive: The unit records only the camera or cameras in alarm.
If a link is created, a macro will run each time that alarm is activated. Alarm: Select the alarm input you would like to link. Macro: Select the macro number you wish to link to.
Videoloss Action Camera: Select the camera you wish to configure. Camera : Relay 1: If enabled, the unit will activate Relay 1 when videoloss Relay 1: Disable is detected. Page 48 Keystroke count while in the menu system: While recording a macro, entering the NOTE menu system, changing multiple menu items, and exiting the menu system are only counted as one keystroke. Using the Jog to navigate the menu system does not count as keystrokes.
Submacros are activated during macros. See the table above for information about programming a macro to activate a submacro. Select the submacro you wish to edit from the menu system. This menu will appear. Edit Submacro 01 [P] [B] [B] [0] Enable All Selecting Individual Enable from this menu will bring up the following menu.
Page 51 Link to Event: Selecting Yes in this menu will activate the event record speed when activity detection is present. Intrusion Detection Setup If Intrusion is selected in Motion Detection Type field, the following parameters are enabled: Sensitivity: Rotate the Shuttle to change the motion detection sensitivity, 10 being the most sensitive.
Use this menu Monitor A: to turn this feature On or Off. Edit Titles Rotate the Shuttle to select the camera whose title you wish to configure, and then press the Enter button. Automatically disable all inputs detecting videoloss. Luminance Histogram A Luminance Histogram is a graphical representation of how many times each gray-level value occurs in an image.
Use this feature to analyze and optimize the video input signal. Page Archive Setup 3. Use this menu to: Port Select Select the Port where the archive device will be connected. Erase Archive Medium Erase the recorded data on a compatible archive device.
Page Communications Audio Limitations: 1. If all the cameras are set to EVENT mode and no events are occurring, no audio will be recorded regardless of the event recording speed.
Page Baud Rate 1. The character bank will appear in the center of the menu. Press the Sequence button to select the desired character bank. Rotate the Shuttle to navigate the Modem Init String. Page 59 Main Menu Communications Ethernet Settings An ethernet connection can be used to connect to the unit from a PC for the viewing of live or recorded images.
Use this menu to configure the Ethernet communications settings. Select from the following: Ethernet: Select Enable or Disable. Page Front Panel Lock 3. While locked, the only operational key on the front panel is the Menu button. Unlock Keyboard To unlock the front panel, enter the Installer password and return Lock Keyboard to this menu.
Highlight the password you wish to change, then press the Password Box Enter button. A password box will appear. Enter a new Install Password 2. Enter the new password using the Number buttons. Page The Quickinstall Menu 3. Page The Systemview Menu Use the following table to find detailed information about configuring specific items from the Operator menu. Page Alarm Action View Screens 1 through These menus provide an overview of the units current operating parameters and the menu settings selected by the user or installer.
Each View Screen is described in the following tables. The default values are bolded and italicized. Background Archive: On or Off. Monitor Setup: Single or Dual. Baud Rate Port 1: ,, , , , , and Baud Rate Port 2: ,, , , , , and Network Address: Page Alarms Alarms 4. Each Alarm Input corresponds with the Camera Input of the same number. Alarm input to camera number assignments can be changed on 10 and channel models.
See Alarm Action menu section 3. Page Alarm Operations During Playback Other display options include: A full screen display of a single camera in alarm, with a sequenced full screen display for additional cameras in alarm. This option is selectable in the menu system see Full Screen Alarm in section 3. Freeze camera display at the time the alarm was received. This feature can be turned off in the menu system see Playback Buzzer, Buzzer Setup in section 3.
Page Searching Searching The DVMRe Triplex is equipped with a powerful search interface to access video files stored on the hard disk or an external archive device. Page Disk Analysis Screen 5. The Disk Analysis Screen will appear. This screen shows a graphical representation of the recorded video stored on the internal hard disk. Page Motion Search 5. This menu performs a motion search with six preset time parameters and a custom search option.
Rotate the Jog to navigate and the Shuttle to select a specific parameter. Page Search Filters Pressing Enter upon completion of the activity setup will start the search and launch the Search Results window. Page Retail Search 5. The customer can select from predefined product names from predefined categories.
To use this feature you must create a text file containing the categories product types and product names sub levels that you want to search. Page 75 When the retail text file has been uploaded this page provides the options to delete or upload a new retail text file. The user can view the retail text file by clicking the link to the retail text file. The user can download the retail text file to a PC by right-clicking the link and by choosing 'Save Target As'.
Page Search Results The following operations can be performed on this screen: Select category in the categories list. Select and deselect sub levels of the currently highlighted category. Clear individual or all selected sub levels. The WaveBrowser option allows the user to view video from any ethernet connected Triplexes with software version 4. For WaveBrowser to function properly, certain ActiveX controls must be set correctly. Page Wavebrowser Overview And Controls 6. The Button Panel: The left side of the window.
Page 80 The Button Panel 1. Play Backward button: Click on this button to playback video in reverse. Stop button: Click on this button to halt all playback operations. The Play Pointer Slider Bar moves to the start of data. Play Forward button: Click on this button to playback video. Page Dvmre Triplex Wavelink 6. This feature can be used by Web Developers to link various cameras to specific Web content. It will also be used by the DVMRe Email feature to allow the recipient of an alarm email to click on a link in the email, which causes the WaveBrowser to connect and play back at the time when the alarm occurred.
Power Consumption 35 Watt nominal single hard disk. Audio Output mV, Ohms. Alarms Inputs 1 per camera. Status Retrievable via RS port. Bits 2 and 3 are used for the Alarm commands. Page Event Actions 8. No Event Change — b If both the start and stop bits are clear, there will be no change to the event status. Page Macro Tables Macro Tables Photo copy this page and use it to keep a record of the programmed macro functions.
Page Scheduled Macro Table Page Warranty And Service Failure to comply with these instructions will delay service of the unit, and may result in the unit not being accepted by the Repair Center.
Page Warranty And Return Information This warranty covers any defects in materials and workmanship. Equipment failures that are due to improper installation, modification, abuse, or acts of nature will not be covered by this warranty. The repair department will evaluate all equipment returned for repair to determine warranty coverage. Page 94 G Print page 1 Print document 94 pages.
Rename the bookmark. Delete bookmark? Cancel Delete. Delete from my manuals? Page 51 Use this menu to setup the Active Zones for motion detection. The screen shown below will overlay the current video image allowing for precise activity zone setup. The disabled zones will be tinted. The enabled zones will be clear. Page 54 This feature detects which inputs have video signals and which are experiencing videoloss. When this feature is activated, the unit will automatically disable the inputs experiencing videoloss.
The DVMRe Triplex will also re-enable video inputs that were previously disabled if a video input signal is detected. Page Archive Setup Select the Port or interface to which the archive device will be connected. Select from the following items. Are you sure? Page 57 9. To exit the menu without making changes, select Cancel, then press the Enter button. Pressing the Menu button also exits the menu without making changes. Multiscreen Dwell: In seconds. Titles Display B: On or Off.
Page 64 Gateway: 3. Primary Name Server: 3. Page Alarms The associated cameras are displayed in the remaining cameos. More than three alarms simultaneously: The unit switches to the maximum multiscreen display, i.
Page Searching Searching The Kalatel DVMRe Triplex is equipped with a powerful search interface to access video files stored on the hard disk or an external archive device. Page Motion Search Pressing the Function key while in this screen overlays a help screen with all the available commands.
Page Search Filters 3. Copy from Disk to Archive. Copy from Archive to Disk. Selecting these functions displays thumbnails in the Search Results window. The WaveBrowser option allows the user to view video from any ethernet connected Triplexes with software version 4.
For WaveBrowser to function properly, certain ActiveX controls must be set correctly. Page 75 Click on the volume to select. It will also be used by the DVMRe Email feature to allow the recipient of an alarm email to click on a link in the email, which causes the WaveBrowser to connect and play back at the time when the alarm occurred.
Page 77 1 in medium size. When in record mode, the Triplex software version 5. Vertical: Lines for PAL. Page 79 Interleaved, Exclusive, or No Change. Relay Outputs, On-screen Indicators. Status Retrievable via RS port.
Status retrievable via RS port. Page 81 If both the start and end bits are set, the associated text will be stored with the next recorded field for that camera. The data is arranged in the form of 16 byte blocks, numbered from 1 to Page Macro Tables Photo copy this page and use it to keep a record of the programmed macro functions.
Page Scheduled Macro Table Page Warranty And Return Information This warranty covers any defects in materials and workmanship. Equipment failures that are due to improper installation, modification, abuse, or acts of nature will not be covered by this warranty. The repair department will evaluate all equipment returned for repair to determine warranty coverage. Page 88 F This manual is also suitable for: Kalatel dvmre triplex Kalatel dvmre-4ct Kalatel dvmrect Kalatel dvmrect.
Print page 1 Print document 88 pages. Rename the bookmark. Delete bookmark? Cancel Delete. Delete from my manuals? Sign In OR. Don't have an account? Sign up! Restore password. Upload manual. Upload from disk.
0コメント